In this article we’re going to examine how to create your own dog mask. We’ll cover the basics and then go on to take a look at some of the more advanced tips and techniques which you can use.
For those who have a dog that likes to bark, and especially if your dog loves to play in the garden and other areas of the house, you need to get them some special dog protection.
Paper Plate 3d Dog Mask DIY Materials: This is the initial part of the set-up which will look a little scary at first, but it is really very simple. All you’ve got to do is take a cardboard cutting board and cut the cardboard into the shape of your mask. You can not simply cut a rectangular shape out of the cardboard, so you’ll need to cut around the edge of the mask so that you get something which resembles a cone. The main thing here is to be realistic with what type of paper plate that you’re using.
Then you will have to wrap the cardboard around the edges of the paper plate, making sure that there is a good seal between the two pieces so you can ensure that nothing will leak once you put the mask on. Make sure the edges are cut so that the edges aren’t sharp, as this can damage the edges of the mask.
Glue it on! The next step involves using some paint. You should spray the paint over the cardboard, making certain it runs smoothly and evenly across the whole mask. You’ll want to start with one side of the mask , so you can work your way round it before moving onto the other side. The paint has to be slightly thicker than the cardboard, and it is best that you leave about one-fifth of an inch of paint on the edges so that it runs over the cardboard.
Don’t worry too much about the paint getting stuck into your mask. It’s easy to eliminate it later, and it will leave you with a nice finished mask to show off dog air filter mask to everyone! It’s also a good idea to wash away any excess paint once you’re done, so you don’t wind up with smudges or smears on your dog.
Then it’s time to glue the mask onto your dog’s head. First you need to make sure that you get a secure fit between the mask and your dog’s head. Once you’ve made sure that it’s secure, then you may begin to glue the mask on the dog’s face. Take the piece of cardboard that’s used for the base of the mask and then fold it over. Make sure that it’s quite powerful and then use your hands to secure the cardboard down in place.
Keep your hands out of the way and use tape to hold it in place as you repeat the process on the cardboard folds till you have the mask snugged securely onto the face of your dog. Do not make the folds too big or else it might look messy. Once you’ve done this, you can then take out the mask and attach the cardboard ears. And attach the other part of the mask onto the dog. Make certain the ears are level and make certain it’s not too short or long as this can cause some problems with the mask slipping off the dog’s face.
If you’re using a dog mask because your pet security, you’ll need to do some sanding to make sure that it’s secure on your dog. You can do it by sanding off any excess paper that may have been eliminated from your mask.